WATER LEVEL OPERATING ELEVATIONS

Activate Reagan Street Pumping Station and close gravity gates

Activate Church Street Pumping Station and close gravity gates

Check Shamokin Creek drainage structures for debris and/or obstructions

Check Drainage Structure #6 (Lower Susquehanna Section) for debris and/or obstructions

Check Shamokin Creek Drainage Structure #2 for infiltration. Activate Spring Run pumping station pump #3 and close gravity gates

Activate Hopper Alley Pumping Station and close gravity gates. Monitor all pump stations every 4-hours in the event of rain or high runoff. Activate Underpass Pumping Station and close gravity gates. Pre-inspect all closure structures. Make arrangements for the possibility of hauling additional sand

Check Shamokin Creek drainage structure #3 for infiltration

Begin monitoring all Shamokin Creek drainage structures for infiltration

Entrance to sand supply plant begins inundation

Possible closure installation situation. Contact PennDOT of possible closure - Closure Structure #3 (East Market St.)

Place personnel at the Flood Control Operations Center 24 hours a day

Begin 24-hour monitoring of levee - Initiate Sectional Plan
Contact River Forecast Center/Weather Service for Updates
Contact volunteers and put them on stand-by
Contact Authority managers and put all personnel on stand-by
Contact City crew and put them on stand-by
Contact electricians and put them on stand-byy

Place 2 operators at Front St. pumping stations
Restrict access on grassy areas of system
Contact media for assistance in filling sandbags and miscellaneous work detail
Contact CP Rail of possible closure - Closure Structure #1 (VFW)

Install Closure Structure #1 (VFW), notify CP Rail, local officials and media of closure

Begin 24-hour monitoring of the wall - Initiate Sectional Plan

Contact Norfolk Southern of possible closures

Install Closure Structure #6
- Norfolk Southern tracks - Weis Markets
Notify Norfolk Southern, local officials and media
Install Closure Structure #7
- Norfolk Southern tracks - near Underpass Pump Station

Limit of Protection

Check Shamokin Creek drainage structures for debris and/or obstructions

Check Shamokin Creek Drainage Structure #2 for infiltration. Activate Spring Run pumping station pump #3 and close gravity gates

Begin monitoring all Shamokin Creek drainage structures for infiltration

Possible closure installation situation
Contact PennDOT of possible closure - Closure Structure #3 (East Market St.)

Begin 24-hour monitoring of levee - Initiate Sectional Plan
Contact River Forecast Center/Weather Service for Updates
Contact volunteers and put them on stand-by
Contact Authority managers and put all personnel on stand-by
Contact City crew and put them on stand-by
Contact electricians and put them on stand-by

Install Closure Structure #1 (VFW), notify CP Rail, local officials and media of closure

Install Closure Structure #3 (East Market St.)

Install Closure Structure #4 (Zimmerman's)
Install Closure Structure #5
- South 10th Street Bridge
30 feet Susquehanna

Check Shamokin Creek Drainage Structure #2 for infiltration. Activate Spring Run pumping station pump #3 and close gravity gates

Activate Spring Run pumping station flood pumps